| EPA-Method
5 – Particulates |
| EPA-Method
201 – Filter Weighing |
| EPA-Method
17 - Particulates |
| EPA-Method
6 – Sulfate Titration: usually there is only
one SO2 fraction per run. If breakthrough analysis is needed,
there are 2 fractions per run. |
| EPA-Method
8 – Sulfate Titration – A typical run has
a front half fraction called H2SO4, IPA fraction called SO3,
and H2O2 fraction called the SO2. The method calls for putting
the front half and IPA together for the H2SO4 result. The number
of analysis per run is project dependent. |
| EPA-Method
12 – Lead: if particulate weights are needed,
see Method 5. |
| EPA-Method
13A – Fluoride (Spadns Fluoride Color Test):
one fraction per run is typical. |
| EPA-Method
13B – Fluoride: one fraction per run is typical. |
| EPA-Method
26/26A – 0050 Hydrogen Chloride, Hydrogen Bromide,
Hydrogen Fluoride, Chlorine, Bromine. |
| EPA-CTM
27 – Ammonia: the method calls for analyzing
impingers 1 & 2 separately to check for NH4 breakthrough. |
| EPA-Method
29 / M-0060 – Metals and Mercury: Method 29 Metals/
Sb, As, Ba, Be, Cd, Cr, Co, Cu, Pb, Mn, Hg, Ni, P, Se, Ag, Tl,
Zn |
| EPA-Method
101 – Mercury |
| EPA-Method
101A – Mercury; usually two fractions per run,
(KmNO4 and HCL). |
| EPA-Method
104 – Beryllium: one fraction per run is typical. |
| EPA-Method
105 – Mercury in Sludge |
| EPA-Method
108 – Arsenic |
| EPA-Method
202 – Extraction, organic and aqueous fractions
determination. |
| EPA-Method
306 –Total chrome, one fraction per run is typical. |
| EPA-Method
306 –Chrome (VI) by HPLC: one fraction per run
is typical. |
| EPA-Method
M-0061 – Chrome (VI) by HPLC: one fraction per
run is typical. |
| EPA-Method
CARB-425 - Chrome (VI) by HPLC: one fraction per run
is typical. |
| Ontario
Hydro Mercury – Mercury: High Range - Instrument
range 0.002ug/ml or .2 ng/ml, Low Range- Instrument range 0.00005ug/ml
or .05 ng/ml |
| Method
SW-7470-A - Mercury in liquid waste: the detection
limit is based on sample matrix and weight. |
Method
SW-7471A - Mercury in Solid and Semisolid waste by
cold vapor: the
detection limit is based on sample matrix and weight. |
| Boiler
MACT - Mercury & Metals: sample preparation (microwave
digestion for coal and ash); MACT Metals (As, Be, Cd, Cr, Pb,
Mn, Hg, Ni, Se) |
Method
EPA-1311/6020/7470A/160.3 – TCLP Metals
TCLP Metals (As, Ba, Cd, Cr, Pb, Hg, Se, & Ag) |
| Method
EPA-1311 – TCLP pH |
| Method
EPA-3051/6020 – Metals, Total Dry Weight Basis |
| Method
EPA- 6020 – ICP-MS Total Quant Analyses |
| Method
EPA – 5E/415.1 – Total Organic Carbon |
